Intro to WAN
- We don’t just ran cables everywhere
- A company may have multiple buildings and needs connections between them
- You could use an overlay network or VPN setup
- Centralized services for a company
- CUCM - cisco’s version of phone servers
- POS - point of sale
- Email servers
- Databases and websites
- WAN topologies
- Leased lines -reliable but expensive and slow
- Frame relay - you used to have to know how to configure these as alternative to leased lines
- ATM - also older
- MPLS - multi protocol label switching (rage in the 90s)
- everything connected and talking
- MPLS circuits that connect to routers at all sites
- The provider has an MPLS network that handles all of the connections
- Everything relies or virtual or logical circuits
- kinda at the 2.5 layer - applies label here and MPLS network recognizes the label
- Metro ethernet -
- doesn’t replace MPLS
- edge routers
- the router used to connect to the MPLS network is the CE (customer edge) router
- the router used to connect to customers from the MPLS network is the PE (provider edge) router
- A cable between two sites
- They handle the cable
- E-LINE and EVC (ethernet virtual circuit)
- E-LAN: Sometimes they give you a big cloud switch between your sites
- E-Tree: hub and spoke connecting to a hub center
- Use QoS to make sure certain traffic gets important treatment
- SD-WAN - software defined wide area networking
- Go over the public internet but add encryption at higher levels
- The cloud is used more so data centers are not as common
- Most orgs are hybrid
- VPNs and overlay networks
- Avoids expensive dedicated lines and can connect sites just as well
- site-to-site VPNs can be slow sometimes
- Use QoS to make sure certain traffic gets important treatment